[ drops ]
AmSolv

AmSolv™ 6900  ||  AmSolv™ 6920  ||  AmSolv™ 6100  ||  AmSolv™ 9350  ||  AmSolv™ 9900


AmSolv™ 6900
Industrial Water Treatment Compound
Scale, Corrosion & Slime Remover

DESCRIPTION
AmSolv® 6900 is a dry sulfamic acid system cleaner and descaler synergistically blended with penetrants, dispersants, stabilizers and inhibitors. AmSolv® 6900 effectively removes accumulations of scale, corrosion and organic matter from heavily fouled systems. AmSolv® 6900 does this in a wide range of open and closed recirculating cooling and heating water systems, evaporating condensers and heat exchangers.

ADVANTAGES
AmSolv® 6900 is the product of choice for on-line cleaning and descaling of water systems where minimum corrosion of the system metals is desired. AmSolv® 6900 is suitable for use in descaling galvanized and zinc coated cooling towers and systems. Properly applied and monitored, AmSolv® 6900 will solubilize and disperse calcium, rust, slime, organic matter, oils, sludge, and other foulants with minimum system metal loss. Old and heavily fouled systems can be cleaned with minimal potential for corrosion or plugging. In these systems, cleanup time can range from several hours, up to several days for heavily scaled cooling towers.

Back to List of Products


AmSolv™ 6920
Industrial Water Treatment Compound
Inhibited Scale Solvent for Heat Transfer Systems
Contains Neutralization Indicator

DESCRIPTION
AmSolv® 6920 is a high activity combination of acid, inhibitor, wetting agent and acid indicator formulated to effectively, economically and efficiently remove scale from heat transfer equipment.

ADVANTAGES
Each gallon of AmSolv® 6920 will effectively dissolve three pounds of lime scale providing lowered compressor head pressure, greater heat transfer, and increased water flow. AmSolv® 6920 will restore efficiency, lower power consumption, and extend equipment life.

Back to List of Products


AmSolv™ 6100
Industrial Water Treatment Compound
Acid Neutralizer

DESCRIPTION
AmSolv® 6100 is a highly active combination of alkalies, inhibitors, dispersants, and passivating agents.

ADVANTAGES
AmSolv® 6100 is formulated to effectively and economically neutralize acidic cleaning solutions for disposal. It also passivates metal surfaces, reducing corrosion rates after equipment is cleaned and flushed.

Back to List of Products


AmSolv™ 9350
Industrial Water Treatment Compound
Recirculating Water System Cleaner
Scale & Corrosion Remover, Dispersant and Inhibitor

DESCRIPTION
AmSolv® 9350 is a concentrated alkaline, triple purpose product. It gently and effectively removes, disperses and prevents accumulations of scale, corrosion, and organic matter. It does this in a wide range of open and closed recirculating cooling and heating water systems.

ADVANTAGES
AmSolv® 9350 is the product of choice for “on line” and new installation clean up jobs. Properly applied and controlled, it will solubilize and disperse oil, grease, mill scale, rust, mineral scale, mud and organics that foul new and old piping systems. AmSolv® 9350 is a noncorrosive product that will passivate and protect system metals from corrosion. In old and heavily fouled systems, deposits are not removed so rapidly that plugging occurs. In these systems clean up time can range from weeks for closed loop systems to several months for heavily scaled cooling towers. AmSolv® 9350 contains no acids or heavy metals.

Back to List of Products


AmSolv™ 9900
Industrial Water Treatment Compound
Cleaner & Corrosion Remover

DESCRIPTION
AmSolv® 9900 is a proprietary blend of special organic chelants designed to remove metal oxides from surfaces of boilers, heat exchangers and other industrial system components. Both open and closed boiler and cooling water systems corrode through improper chemical and mechanical operations. Once iron oxide deposits have developed within the water distribution system, the corrosive process accelerates through underdeposit and MIC (microbially induced corrosion). The oxides formed migrate and deposit on heat exchange surfaces where they reduce flow and heat exchange capacity. Newly constructed systems have mill scale, rust and other deposits that must be removed prior to placing the system in operation in order to properly passivate metal surfaces and protect the system from future corrosion.

ADVANTAGES
AmSolv® 9900 provides highly effective removal of metal oxides while maintaining low corrosion rates for increased equipment life. It produces minimal corrosive or harmful vapors.

Back to List of Products


HOME   ||   About AmSolv   ||   Contact Us
 
AmSolv® Products  ||   AmSolv® Standard Products  ||   Water Problems


AmSolv®
Phone: (888) 4-AmSolv®, Phone: (972) 938-1401
E-Mail: info@amsolv.com E-Mail: sales@AmSolv.com

footer